• Welcome to realmuscleforum.com
  • injection technique

    Discussion in 'Anabolic Zone' started by laxgoaliesrhs, Sep 5, 2012.

    1. suighja

      suighja Well-Known Member

      Joined:
      Dec 2010
      Posts:
      39,860
      Likes Received:
      0
      injection technique

      thats what i mean mean, 1ml of oil takes me 4-5mins to inject useing a 2.5ml barrel and a 25g orange needle when i put the needle fully in me

      then it takes 15secs to inject the same oil useing the same stuff ... when the needle is like 85% in me I'd use 5/8 inch for delts anyway so you'll be fine leaving the pin out a bit
       
    2. crormaSoila18

      crormaSoila18 Well-Known Member

      Joined:
      Jan 2011
      Posts:
      38,235
      Likes Received:
      0
      injection technique

      Warm the oil, or press harder. I take 30 seconds to jab 4ml of oil using the same pins and barrels as you and I stick the needles all the way in. 4/5 minutes is ridiculous. Time under tension or what? You must get cramps in your fingers.
       
    3. Terry4

      Terry4 Well-Known Member

      Joined:
      Dec 2011
      Posts:
      988
      Likes Received:
      0
      injection technique

      must be something wrong with the needles i have then if they take that long

      i used to do quads with blues and inject 2ml in no time at all

      cheers guys
       

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice