evening all, when i am injecting my quad with a 1 inch blue i keep getting some of the test coming out of where i am injecting :-( im going all the way in but keep getting a trickle of test coming out when the needle is in and when i take the needle out :-( i inject the outer quarter of my quad. any idea what i can do to help this guys? also does the test still get into the blood stream if it doesn't go deep enough and goes in sub q? cheers
injection question pleasw help lads I never use anything smallder than a 1.5" 21 guage for oils. That is probably part of the problem, your not getting deep enough for the muscle belly.
injection question pleasw help lads im sure its just the oil that runs down the needle when you get the air out mate, when you push in the oil stays on skin surface, i get it too although i use 1.25 inch and go in all the way,
injection question pleasw help lads I had the same with a glute injection. It does go into ur bloodstream still just takes a bit longer to be absorbed. I changed back to greens and not had a prob since. It was pretty uncomfortable for a while but you can live with it.
injection question pleasw help lads I use 1" violet in quads (aren't blues 1.25" anyway) and never have a problem. Easy solution for you though is just use the Z-Track method, simples.
injection question pleasw help lads Unless your legs are fat a 1 inch is fine, in fact I always use a 1inch orange - less pip and scar tissue. I used to get the odd drop escaping after injecting, however if you inject super slow, then once all the oil is in, leave the needle in for 10 secs or so, Ive found it allows the oil to disperse nicely and I rarely get this now.
injection question pleasw help lads agree with skinhead,most likely just the oil of the needle itself when you push out the air,it sits on the surface of the skin, a minor really nothing to worry about,unless you see it physically coming out when your injecting
injection question pleasw help lads cheers for the input lads. maybe im injecting to quick because and soon as i take the needle out i have to apply pressure to make sure no more gear comes out.also the blues i have are 1inch. i have the 1 and quarter inch ones but i hit a nerve the last time i used one :-(
